Template Files

for the Laser Engraver: click here to download

Payment Form
click here to view
Machines at Trafalgar Campus

Laser Engraver and Cutter

Trotec Speedy 400
    • Max Engraving Area: 38 × 23 × 12 inches (X × Y × Z)
    • Usage cost: $1/minute
    • Setup charge*: $10
    • Resolution: 5μm
    • Rotary option: available on request
    • Laser: 80W CO2 Laser using a 4.0 inch lens
    • Software: i-Cut Vision Pro & Job Control
    • Files accepted: Adobe Illustrator (.AI) Adobe Portable Document Format (.PDF)
Trotec Speedy 300
    • Max Engraving Area: 29 × 17 × 8 inches (X × Y × Z)
    • Usage cost: $1/minute
    • Setup charge*: $10
    • Resolution: 5μm
    • Laser: 80W CO2 Laser using a 1.5 inch lens
    • Software:Job Control
    • Files accepted: Adobe Illustrator (.AI) & Adobe PDF (.PDF)
    **Pass through is prohibited**

3D Printing (FDM)

Stratasys F370
    • Max Build Area: 14 × 10 × 14 inches (X × Y × Z)
    • Technology: Fused Deposition Modeling (FDM)
    • Material: ABSplus ASAA or PLA
    • Resolution on z-axis: 0.178 mm
    • Software: GrabCAD
    • Files accepted: .STL
    • Support Material Capable:Yes
Stratasys F170
    • Max Build Area: 10 × 10 × 10 inches (X × Y × Z)
    • Technology: Fused Deposition Modeling (FDM)
    • Material: TPU
    • Resolution on z-axis: 0.33 mm
    • Software: GrabCAD
    • Files accepted: .STL
    • Support Material Capable:Yes


3D Printing Material Costs

FabLab will reach out to you to detail the charges for 3D printing, including both the materials and support costs. When you submit your file, ensure to indicate your preferred method of contact, either through Sheridan email or SMS.

Small Prints
(less than 5 inches cubed in overall size)
Setup cost is $2.58 for ASA, ABS, and TPU to cover consumables and support material (QSR) removal. For PLA the setup cost is $1.09 and the support material will have to be broken off after it is pick it up. The rest of cost is how much material is used.
Large Prints
(over 5 inches in any direction. Up to the max size of the print bed)
Setup cost is $8.55 for ASA, ABS, and TPU to cover consumables and support material (QSR) removal. For PLA the setup cost is $1.09 and the support material will have to be broken off after it is picked up. The rest of the cost is material used.

  • ASA $2.82/CI
  • ABS $2.70/CI
  • TPU $3.33/CI
  • QSR $3.57/CI
  • PLA $1.25/CI